You need to provide at least one parameter: zone name.

Enter the full name of the zone to be created. It can be either a forward zone, such as namesurfer.com, or a reverse zone, such as 42.168.192.in-addr.arpa. The server must be authoritative for the zone, and it must allow zone transfers from the host running FusionLayer NameSurfer.

Optionally, you can fill out the name or the IP address for the name server to be used, or you can let NameSurfer search for it by leaving it blank.

Please note that zone-transfer may take a while if the network-connection is slow or zone is really big.

You may also choose whether to use the default port 53 to make the zone-transfer to or change it to some non-standard. For example if you are transfering data from another FusionLayer NameSurfer directly, use 8054.

With the checkbox located at the bottom, you can create or delete reverse maps automatically. When selected, only the PTR-records are created – but not the zones – so reverse-zones should be created/imported before forward-zones.